Most test days are wasted. Not because the changes were wrong, but because three things were changed at once, the track temperature moved 8 °C in the middle, and nobody wrote anything down. A disciplined method turns a test day into permanent knowledge.
Drill
Test method
Goal: 3 valid laps each with A and B, then compare
- Establish a baseline. Run the kart exactly as it is, on the tyres you will use, for enough laps to be consistent. Record everything: widths, angles, axle, bars, pressures cold and hot, gearing, jetting, air and track temperature. This is your reference; without it every later result is an opinion.
- Change one thing. One. If you change track width and pressures together and the kart is better, you have learned nothing about either.
- Keep the conditions comparable. Same number of laps, same fuel level, same tyres, similar track temperature. If the conditions have moved, re-run the baseline before you trust the comparison.
- Judge on data AND feel. Lap time alone is noisy; feel alone is unreliable. A change that feels better and is a tenth slower is usually a change that will pay off in a fifteen-lap final. Note both.
- Write it down immediately. In the awning, before the next session, while you still remember. Memory is the weakest component on any kart.
