Setup

Tyre pressure strategy

Qualifying vs the final, cold morning vs hot afternoon: choosing the cold pressure that lands in the window.

Lesson 14/23 · 7 min · Intermediate

Lesson

14/23

Duration

7min

Level

Intermediate

Tyre pressure is free, takes thirty seconds to change, and decides whether your tyres reach their working window at all. It is also the adjustment most beginners get wrong, because they set a number in the paddock and never look at what the tyre is actually running at on track.

The pressure you set in the awning is a cold pressure. What the tyre works at is the hot pressure, several laps in, and the gain between the two depends on the compound, the track temperature, the session length and how hard you drive. It can easily be 0.2 bar or more. Your job is to choose a cold pressure such that the hot pressure lands in the tyre's working window: on many kart slicks somewhere in the region of 0.72–0.88 bar hot (0.82–0.87 on a KZ), but always check the manufacturer's guidance for your control tyre.

hot pressure (bar) →grip →[ too low:rolls onto theshoulder, grains ]≈ 0.72–0.88 bar hotworking window[ too high:greasy, slideslate in asession ]0.60.70.80.91.01.1
Grip against hot pressure: there is a peak, and both sides of it are slower.

Key takeaways

  • Aim at a hot pressure in the tyre's window (about 0.72–0.88 bar on kart slicks, 0.82–0.87 on a KZ); check your tyre's guidance.
  • Pressure up = fast warm-up, greasy late. Pressure down = slow warm-up, consistent long run.
  • Qualifying higher, final lower; cold day higher, hot day lower; wet substantially higher.
  • Rear pressure is mainly for the hot-pressure window: higher tends to calm the rear a touch, lower tends to free it and costs time. Neither cures hopping.
  • One gauge, hot readings taken immediately, and a written table of your own.

Check yourself

Question 1/4

Which pressure actually determines how the tyre performs on track?

4 questions · 75% to pass