An engine does not burn fuel. It burns a mixture of fuel and air in a fairly narrow ratio. The amount of air going through the carburettor depends on how dense that air is, and air density changes all day long with temperature, pressure and humidity. Your jetting has to follow it.
Air density
Goal: 2 valid laps each with A and B, then compare
Cold air is dense: more oxygen molecules per litre, so more fuel is needed to keep the ratio right, and the engine makes more power. Hot air is thin: less oxygen, less fuel needed, less power. Altitude works the same way as heat: a track at 1000 m has thinner air than one at sea level. The rule is short: denser air needs a richer setting (a bigger main jet or a richer needle position); thinner air needs a leaner setting.
Air density & jetting
The same model the game uses. Treat the jet numbers as relative steps, not as a recommendation for your engine. Always start from your manufacturer's or series chart.
Air density
1.145kg/m³
Ideal main jet
162
Same as the 20 °C / 420 m reference.
When you are unsure, err rich. A slightly rich two-stroke is a little slow; a lean one seizes.
