Driving

Reading your data

Lap and sector times, minimum corner rpm, maximum rpm and gearing: getting real answers from a MyChron or Alfano.

Lesson 23/23 · 9 min · Intermediate

Lesson

23/23

Duration

9min

Level

Intermediate

Almost every racing kart carries a dash logger, an AiM MyChron or an Alfano are the two you will see most. Even the basic functions answer questions that would otherwise take a whole test day, and you do not need a data engineer to use them.

Drill

Find the time

Goal: One lap within 3 % of the reference lap

The channels that matter
ChannelWhat it tells you
Lap timeThe headline number. Useful, but it hides where the time went.
Sector / split timesWhere the time actually went. The single most useful function on the dash.
RPMEngine speed throughout the lap. Its minimum and maximum are both diagnostic.
Water temperatureEngine health and warm-up. Watch it on every out lap.
EGT (if fitted)Exhaust gas temperature: your mixture indicator.
Speed (from a wheel sensor or GPS)Corner speeds and top speed; some units also give a GPS track map.
Lateral / longitudinal G (on GPS units)How hard you are cornering and braking, and how smoothly.

Key takeaways

  • Sector times tell you where the lap time went; lap time alone does not.
  • Minimum corner rpm is a precise measure of the speed you carried through a corner.
  • Maximum rpm at the end of the straight is your gearing check.
  • Compare your best lap with your typical lap before comparing with anyone else.
  • Keep a circuit file so next season starts from data instead of a guess.

Check yourself

Question 1/4

What does minimum rpm in a corner tell you?

4 questions · 75% to pass